|
Tassimo Online Manual
|
|
|
IMPORTANT
Before using your Tassimo machine for the first time, it must be prepared by following the procedure below. Note: it is normal for all the lights to flash when you turn on the machine.
Complete these simple steps to begin enjoying your favorite drinks.
- Rinse the water container, fill it to "max" with fresh, cold water and place it on the machine. Check that the water container is properly inserted in the slot on the back of the machine. Connect the machine to the electrical supply and press the on/off switch located on the back of the machine. All the indicator lights will flash.
- Place a large cup (at least 11 oz/ 325 ml) on the adjustable cup stand. Open the brew mechanism, position the cleaning disc (included in your package) on the T DISC holder, bar code facing down. Firmly close the brew mechanism by pressing the clamp down until it shuts.
- Wait five seconds then press and release the start/stop button to start the machine. You will hear the machine run for a short period to fill the internal water heater. When the machine stops running, the STANDBY light will illuminate.
- Open the brew mechanism and close it again, leaving the cleaning disc in place. The orange HEATING light will begin to flash. Wait about a minute until the green AUTO light illuminates, then press and release the start/stop button. The machine will fill the cup with water. When the machine stops running, empty the cup and place it back on the adjustable cup stand. Repeat this step once more in its entirety.
- Open the brew mechanism and remove the cleaning disc. The HEATING light will illuminate. Your machine is now ready to use.
IMPORTANT: Do not discard the cleaning disc after use – you will need it for regular cleaning of the machine.
|
|
|
|
|
